Haven Distributors – Equipment for Removing Mold Damage

Key Considerations When Choosing A Mold Inspection And Removal Company

There’s a lot of misinformation being spread about mold infestations in the home. Sadly, some of it can’t really be dispelled without a competent inspection and a real scientific test. However, there are some things that you can do to lessen your chances of having a mold problem, or a mold problem reoccurring after treatment. Problems With Mold Are Often The Result Of Moisture Mold and mildew can hardly grow without a source of moisture. In lots of homes, preventing moisture in every case can be somewhat difficult, but it’s necessary for your long term health. Not only do some kinds of molds cause serious allergies, rot boards in your home and smell bad, but some particular kinds are highly toxic. What this means is that you need to start inspecting your home every few months and look for problems with the gutters overflowing, downspouts leaking, drains dripping, windows with condensation, and shower curtains that never dry. These are all possible sources of mold and mildew growth. Don’t Do It Yourself, Hire A Professional Mold Inspection Company Searching under your sinks, the shower curtains, and around the laundry area are all easy to do and most people can. However, crawling around in your basement, crawlspace, or attic is something that requires athleticism and persistence. You should also have a good flashlight, magnifying glass and a firm knowledge of what constitutes an issue. Any amount of moisture, whether from a pipe, condensation or outside is a dead giveaway that there will be mold, now or later. Anyplace that has been wet in the past will most likely be growing mold now. Trained professionals in the mold removal industry have years of experience in finding problems.  They also know how to properly dry the moisture. Proper Drying Equipment Also, they also have access to certified mold testing facilities to know the extent of the problem. Some molds would necessitate the homeowner leaving the house and waiting until all of it is removed and re-tested. Other molds might only be causing serious allergies, and aren’t necessarily dangerous, but very annoying. Should You Go With The Local Mold Company Or The Big National Chain Of Professionals? You’ll run into all kinds of different levels of experience, education, and knowledge when looking for a qualified mold removal contractor. There are always going to be fly by night contractors that jump on the next best thing and then move on quickly when they see something better comes along. On the one hand, it’s always better to do business with the local company, with a local address and that contribute to all the local businesses with their profits. However, you should always make sure of several important factors. They should have certified technicians that have credentials that you can check. The company should also be certified as should their mold testing facility. Look for such certificates as the NAMRI (National Association Of Mold Remediators  & Inspectors) or other certifying bodies that ensure that their people are trained.  A good mold removal company will also have Facebook or Yelp pages like this Tallahassee mold removal company. Another way to tell if it’s a solid company is to check for the mold remediation company in Manta or BBB or other prominent business directories. When it comes to the safety and health of your family, you can’t be too careful. Many children end up being allergic to molds because of overexposure, and that can be prevented. With the proper care, inspections, and removal, mold doesn’t need to be a problem for your family or your home.

Read more

What to Expect when You Call a Mold Remediation Company

Mold exposure leads to health problems. It can grow indoors and outdoors, but when it travels inside, it can cause respiratory problems, allergies, sinus infections and skin rashes. In extreme cases, mold can cause death. What is more, mold can grow quickly.  A small colony of it can form in just two days after the initial mold spore makes contact with an indoor surface. In homes, the areas that are most susceptible to this are air ducts, basements and other areas where moisture is present. Because of how fast mold can grow and because of the health problems it can cause it is crucial to call a mold remediation company the moment you notice a significant amount of it. How to Spot Mold Mold can come in different colors like white, black, brown, green and even orange or brown. It might look powdery or furry. Powdery, black mold is considered the most dangerous type. Contact your mold remediation company right away if you notice it. In addition to seeing the telltale stains, your family members may experience some symptoms of mold exposure. These symptoms may include a runny nose, wheezing, stuffiness, sinus pressure or watery eyes. People with asthma may experience more attacks. What Happens When You Call a Mold Company A mold remediation professional will use many professional tools, techniques and strategies to remove the mold and prevent it from re-growing. The first step is to test the quality of air in your home. This will let you know just how serious the problem is and how extensive the damage is. They will also test the mold to identify the strain growing in your home. They will then proceed with removing the mold as thoroughly as possible. The most common areas for unhealthy amounts of mold to grow in are HVAC ducts. This is one reason that you should have a regular cleaning schedule for your air ducts. As the cleaning is done, the professionals  will also make sure that no cross-contamination occurs.  They will also dispose of any and all mold in a professional manner.  The act of removing the mold can actually disturb and spread the mold spores so the mold removal should be done inside a containment barrier with negative air pressure. Before testing the area to see how much cleaner the air quality is, they will dry and dehumidify the areas affected. If needed, your mold company will also dispose of any materials that needed to be torn apart. Sometimes mold is so bad it destroys walls or ceilings. These areas will also be treated so that future mold growth will be inhibited. Contact your mold remediation company the moment you notice any mold growing indoors. The first step to keeping your home’s atmosphere as healthy and clean as it should be is having a professional measure its air quality. You can take preventative measures following a mold remediation. Keep your air ducts clean by having them cleaned regularly. When you store items in garages or basements, keep them dry. Finally, leave open boxes of baking soda in moisture-prone areas to inhibit mold growth.

Read more

What Can You Expect to Pay For Mold Inspection Services?

The severity of a mold problem within a home or business can vary, and so can the quotes for services. It’s hard to judge the costs for mold remediation services until you have the professionals come out to your place. They will give you a detailed cost estimate after the inspection. Of course, you still want to know ballpark figures for what you might have to pay, right? First, you’ve got to understand that the inspection is different from the cleanup. The inspection can also be much cheaper than the cleanup. If they find mold and plenty of it, you’re going to want them to clean it up. You can always get a couple of estimates to compare. When it comes to the inspection, you might just have to pay somewhere around $100-300. Of course, on the high end of the agreement, you’re going to have to pay a few thousand dollars, possibly even a little more. That’s why it’s so important that you get to a mold inspection company before it spreads too much. If you see any mold at all, you should always be investigating the source. If you can find the source on your own, then it’s possible that you can see the size of the problem. However, most times the source of mold is going to be hidden. If you have a problem finding the source, then think about the situation for a moment. Could there be a pipe hidden underneath that has burst? What other kinds of moisture could be getting in there to cause the mold growth? The professionals have all sorts of tools when it comes to the mold inspection. One important tool is a moisture meter.  Here is a quick demo of  simple moisture meter in action. At most, you’ll be able to find the source on your own and make a repair if necessary. The mold inspection team still needs to use all their fancy equipment to detect spores that you can’t even see with your eyes. They will get rid of all the mold that is in your place, and since the source will have been eliminated, you’re going to be good to go. Unfortunately, as mentioned, the cost of the mold remediation team cleaning up the infestation can be quite expensive if there is a big problem. It’s a cost that can’t be avoided because cleaning up mold damage is not a do it yourself project.  The removal needs to be completed inside a protective barrier with negative air pressure so that the spores don’t contaminate the rest of your home. Some mold isn’t that bad and can be controlled with home remedies and the likes. But if you don’t know what you’re dealing with, an inspection might be your best bet.  Find out more information, then decide if you want to move forward with the quote that you’ve received for eliminating the mold and restoring your space.

Read more

How Water Damage Can Lead To Mold Problems

Mold is a type of toxic growth that tends to sprout anywhere moisture is prevalent. Although mold is a naturally occurring element, it’s unwelcome in homes due to some health reasons. In this article, learn how mold grows in homes, how to detect it in your house, and what health risks it poses. The link between water damage and mold; moisture and mold go hand in hand. If individual fixtures or furniture are exposed to an abundant amount of water for long, mold will definitely grow on it. This is why uncontrolled water damage in a house will in most cases lead to the growth of mold. Different types of water damage that can bring about mold.  Several types of water damage can bring about mold in your home. These include: 1.) Water flooding – If your house is exposed to a flood, the floors, fixtures and furniture in your house will absorb a lot of water. If not dried, that moisture will create the perfect environment for mold to grow. Such flooding can be caused by increased rainfall, storm water overflows, busted pipes, etc. 2.) Plumbing leaks – Though small, undetected leaks can result in increased moisture penetration on your walls, floors, and ceiling. If not plugged in time and the damage reversed, mold growth will occur. 3.) Dampness – The third and most common type of water damage that may result in mold growth is dampness. There are three types of dampness. One is rising damp that results from moisture in the ground rising up the walls. The other is penetrating damp that enters your home from outside, e.g. via rainfall on the walls. And the last is dampness caused by poor ventilation. Any of these can increase moisture levels in your house and encourage mold to grow. Health Effects of Mold Mold has a diverse number of health effects on humans.  When breathed in, toxic mold spores can cause headaches and irritation of the eyes, nose and mouth. For allergic people, the mold is a strong allergen that can cause coughing, sneezing, breathing difficulties, and irritation of the respiratory system. Increased exposure to mold can cause dire health problems such as asthma, migraines, and neurological problems. How to Spot if Your House Has Mold There are two keys to detecting mold in your house:  One is to know what mold looks like. For the most part, mold appears as dark spots of sponge-like mass. The other key is to know where to find mold in your house. This refers to any wet or damp place. If you have had water damage, start by looking for mold on the floors. If yours is just a case of dampness, look in the bathrooms, basements and kitchens, before checking in other areas. Alternatively, you can have a team of house inspectors carries out thermal imaging to locate damp areas in your home. How to Remove Mold From Your House If you have a mold or water damage in your house, follow the following steps: 1.) Have the house dried by flood restoration experts. 2.) You can also use dehumidifiers and heaters to rid your house of moisture. Check out this video to see a quick demonstration of a commercial dehumidifier. 3.) For serious cases such as flooding, have the house professionally inspected for mold. Any sighted mold should be cleaned using soapy water. 4.) If the mold is too widespread, consider removing the affected fixtures and having them replaced. 5.) Plug all plumbing leaks and keep your home well ventilated to keep mold away.

Read more

6 Myths about Mold Remediation Companies

Mold is very dangerous. People who inhale mold spores may become very sick, so it’s much better to keep a house or property under strict control. However, mold developments can be silent for long periods of time, so you may have it in the house and not be aware of it. This is why hiring a mold remediation expert is a good idea, as they have professional equipment and better skills than any homeowner. Nonetheless, these are six myths about mold remediation companies that prevail. Myth 1: Mold remediation companies can clean your house 100%. Although they are usually effective, these experts aren’t mediums. They can’t kill all spores, especially if your house has a lot of places that make great environments mold growths. This is why you should always repair your roof and any leaking pipe so that you don’t create conditions for mold spores to survive and thrive. Myth 2: Mold experts can detect event the smallest developments, regardless their positioning in a house. It’s true they have special detection equipment, so you shouldn’t worry your house is still going to be infested after the professional cleaning. However, hidden leaks and stale water you can’t detect might infest your house with mold again, while being impossible to detect in their early stages. Myth 3: Remediation done by professionals doesn’t use toxic chemicals. It doesn’t use such chemicals, but the removal action in itself is a health hazard. This is why you should send your children away from home until experts finish their job. Spores that become airborne can easily enter the lungs, where they can cause severe problems. Myth 4: Once removed, mold never returns. Some substances prevent the formations from reappearing. However, there’s no guarantee those spores won’t find a favorable environment in other places inside your house. You should always keep your house dry and insulated. Besides, you need to hire experts to do the regular inspections and perform all repairs as soon as you spot a problem. Myth 5: Mold removal experts can help you keep the issue under control, even if your house has structural problems. No expert can help you keep your home mold free unless you insulate it properly. If your windows and your roof allow water to infiltrate, you can hire the best mold removal company possible, and yet fail to keep your house safe. Myth 6: All such companies are alike. When choosing your mold removal services provider, you need to do some prior research, as not all these companies are alike. You have to make sure their former and current clients are happy, and that the company employs only well-trained and skilled professionals. Last but not least, you should always ask for post-remediation air quality test. You need to rest assured the provider is going to do a good job. This is how you can prevent future problems.

Read more

Equipment, Enclosures and Shelter

We specialize in the right equipment for all types of projects, businesses and owners. We are developing the best website possible to show you everything that we have to offer and to provide the best advice for business owners. Rest assured that we are here to be your advocate and to present the pros and cons of each piece of equipment that we offer.  We want you to be happy and we know that word of mouth is the best endorsement that we could ever receive from a client. Stay tuned for our new site.  Check back soon.

Read more